This Auto Test Kit is very usefull for car repair technicians when performing tests on cars. It allows easy access to the sensors terminals with its various ready made connecting terminals and probes. It can also be used in conjunction with measuring and testing equipment such as multimeters, oscilloscope and sensor simulator etc.

This serial RS232(COM)port to USB converter allows interfaces to be used with newer version PC or laptop that do not have a COM (RS-232) port. The converter comes with the FTDI FT8U232BM single chip which provide data transfer rates of 300 ~ 460,800 Baud and is perfect when communicating the diagnostic interface.

This cable is used to extend the reach of a USB Interface from the computer to the vehicle.

Sunix's CBS2000X serial cardbus offers you two ports of serial for all your connection needs. The ports have a data transfer rate up to 115 Kbps

This special breakout box enables you to access all pins on a 16 pin OBD2 connector via 4mm female banana sockets for most makes of cars using OBDII Diagnostic Link connector.

Safety clamp-type test probe with split test clamp. The sprung stainless steel tip can contact insulated leads with cross sections between 0.25mm and 1.5mm(3.5mm diameter)without strip them. 4mm diameter brass socket connection.